IntegralClick on the picture to zoom in.
PRODUCT SPECIFICATIONS
FLUME-EM-100
· One-size-fits-all
EMP, One-Package. Based on the Faraday EMP, measure the volume of conductive liquid flow.
01
Classification: EMP
02
Structure form: One
TECHNICAL SPECIFICATIONS
Technical specifications
Check the specifications against your operating conditions and use the selection tables to confirm your order configuration.
View selection tables ↓| Model | FLUME-EM-100 |
|---|---|
| Nominal pipe size | DN15~DN300 |
| Liner material | PTFE / FEP (F46) / neoprene (CR) / polyurethane (PU) / PFA |
| Connection | Flanged connection |
| Electrode material | 316L, Hastelloy C, Hastelloy B, titanium, tantalum, platinum-iridium alloy, or tungsten carbide-coated stainless steel |
| Housing material | Powder-coated carbon steel / 304 stainless steel / 316 stainless steel (select B1, B2, or B3) |
| Ambient temperature | Sensor: −40 to +80 °C. Converter: −15 to +50 °C. |
| Process medium temperature | ≤150℃ |
| Operating pressure | DN15–DN300: 1.6 MPa (specify special requirements when ordering) |
| Accuracy class | Class 0.5 at 0.5–5 m/s |
| Communication | RS485 (Modbus protocol), HART |
| Load resistance | ≤750 Ω with 4–20 mA output |
| Medium conductivity | ≥5μS/cm |
| Flow velocity range | 0.5–10m/s (recommended 0.5–5m/s) |
| Display readings | Instantaneous flow, velocity, percentage, empty-pipe ratio, forward and reverse totals, and alarms |
| Ingress protection | IP65 / IP68 |
| Explosion protection marking | Ex d IIB T6 Gb |
| Output signal | Fully isolated 4–20 mA, pulse, and high/low alarm outputs |
| Power consumption | ≤15W |
| Power supply | 220V AC 50Hz、24V DC |
Product selection
FLUME-EM-100| Code | Nominal size (mm) | Measurement range (m³/h) |
|---|---|---|
| 15 | DN15 | 0.32~6.36 |
| 20 | DN20 | 0.57~11.30 |
| 25 | DN25 | 0.88~17.66 |
| 32 | DN32 | 1.45~28.94 |
| 40 | DN40 | 2.26~45.22 |
| 50 | DN50 | 3.35~70.65 |
| 65 | DN65 | 5.97~119.40 |
| 80 | DN80 | 9.04~180.86 |
| 100 | DN100 | 14.13~282.60 |
| 125 | DN125 | 22.08~441.56 |
| 150 | DN150 | 31.79~635.85 |
| 200 | DN200 | 56.52~1130.40 |
| 250 | DN250 | 88.31~1766.25 |
| 300 | DN300 | 127.17~2543.40 |
| Code | Pressure rating |
|---|---|
| P2 | 1.0 MPa |
| P3 | 1.6 MPa |
| P4 | 2.5 MPa |
| P5 | 4.0 MPa |
| Code | Sensor material |
|---|---|
| B1 | Carbon steel |
| B2 | 304 Stainless steel |
| B3 | 316 Stainless steel |
| Code | Liner material |
|---|---|
| C1 | PTFE (F4, ≤120℃) |
| C2 | FEP (F46, ≤120℃) |
| C3 | Neoprene (≤65℃) |
| C4 | Polyurethane rubber (≤40℃) |
| C5 | PFA (≤150℃, Vacuum resistance) |
| Code | Electrode material |
|---|---|
| K1 | 316L |
| K2 | Hastelloy B |
| K3 | Hastelloy C |
| K4 | Titanium |
| K5 | Tantalum |
| K6 | Platinum-iridium alloy |
| K7 | Tungsten carbide-coated stainless steel |
| Code | Accuracy class |
|---|---|
| E2 | Level 0.5 |
| Code | Construction |
|---|---|
| S1 | One (≤70℃) |
| Code | Power supply |
|---|---|
| D1 | 220V AC 50Hz |
| D2 | 24V DC |
| Code | Signal output |
|---|---|
| F1 | (4~20) mA, frequency, pulse, RS485 (Modbus) |
| F2 | (4~20) mA, frequency, pulse, HART |
| Code | Explosion protection marking |
|---|---|
| U1 | It's blastproof. |
Confirm specifications and ordering options
Contact us with the measurement target, operating conditions, and installation requirements to confirm your configuration.
Contact us

