AxisClick on the picture to zoom in.

PRODUCT SPECIFICATIONS

TEMPSEN-BM-100

Double metal thermometers Axis

Double metal thermometers, axle-direction configuration. Double metal indicator thermometers

01

Classification: Double metal thermometer

02

Structure form: Axis

Zipper, return to binary thermometer class

TECHNICAL SPECIFICATIONS

Technical specifications

TEMPSEN-BM-100

Check the specifications against your operating conditions and use the selection tables to confirm your order configuration.

View selection tables ↓
ModelTEMPSEN-BM-100
Temperature measurement principleA rolled bimetal strip combines two metals with different coefficients of thermal expansion. It bends as temperature changes, moving the pointer for a direct reading.
Mounting typeAxial (back mount). The dial and protection tube share an axis, and the dial face is perpendicular to the tube. Suitable for panel or pipe-side mounting.
Dial diameterΦ60, Φ100, Φ150 (Φ63 / Φ80 / Φ160 Optional)
Measurement range-80–+500℃ (typical -20–+100℃, 0–150℃, 0–200℃, 0–300℃, 0–400℃)
Scale divisionΦ60 and Φ100: 2.0 °C per division. Φ150: 5.0 °C per division. Match to the selected range.
Accuracy classClass 1.5 (standard) / class 1.0 (optional)
Case material304 stainless steel body stamped, sealed waterproof; optional 316L or stainless steel + spray (acid-resistant fog)
Window materialIndustrial glass (standard) or shatter-resistant polycarbonate (optional)
Sensing elementHeat-stabilized bimetal spiral spring with low long-term indication drift
Protection tube material1Cr18Ni9Ti / 304 / 316L stainless steel optional PTFE covered (reserve) Hastelloy (strength corrosive)
Protection tube dimensionsφ8 / φ10 × L (insertion depth 75–1000mm Optional); Optional cone head easily inserted
Process connectionM20×1.5 / M27×2 / G½ / 1/2NPT thread; optional DN25–DN50 Flange, Adjustable compression fitting
Insertion depth75 / 100 / 150 / 200 / 250 / 300 / 400mm (typical); protection tube Insert media depth ≥50mm and not less than the temperature segment length
Pressure ratingConstant pressure –6.4MPa (Protection tube by wall thickness and diameter, pressure type Specify when ordering)
Ambient temperature-20–+60℃ (dial); optional -40–+80℃ Extended-temperature type
Ingress protectionIP65 (shell sealed); optional IP67
Vibration-resistant optionSilicone oil (Damping fluid) anti-vibration in the shell, applicable to powerful vibration sites such as pumps, compressors, etc.
Electrical contact optionHigh and low limits alarm contact (1–2 group), contact rating 220VAC / 1A, with control of the circuit
Applicable standardsJB/T 8803 bimetallic thermometer / JJG 226 verification regulation / GB/T 1226 (common requirements)
Suitable operating conditionsPipelines and container temperature of power plants, chemicals, metallurgicals, heating pipelines Display; Axial is more used for panel installation, equipment side sections or space-limited sections
Product featuresNo power supply, direct reading in situ, structural robustness and maintenance; full of dual metal Range Linear scale; surface case oily resistance; Optional The tape. Electrical contact Realization on the ground Alarm

Product selection

TEMPSEN-BM-100
Dial diameter
CodeDial diameter
D1Φ60
D2Φ100 (Typical)
D3Φ150
Measurement range (℃)
CodeMeasurement range (℃)
R1-80~+40 / -50~+50
R2-20~+100 / 0~+100
R30~+150 / 0~+200
R40~+300 / 0~+400
R50–+500 (Specify when ordering)
Accuracy class
CodeAccuracy class
E11.5 Class (Standard)
E2Level 1.0
Case / window
CodeCase / window
H1304 stainless steel + industrial glass
H2304 stainless steel + PC Shatter-resistant Window
H3316L Stainless steel shells (resisting)
H4Fill Silicone oil Vibration-resistant type (resilient)
Protection tube material / diameter
CodeProtection tube material / diameter
M11Cr18Ni9Ti φ8
M2304 stainless steel φ10 (Standard)
M3316L stainless steel φ10 (resisting)
M4PTFE wrap (strength corrosive)
Insertion depth L
CodeInsertion depth L
L175 / 100mm
L2150 / 200mm
L3250 / 300mm
L4400 / 500mm
L5750 / 1000mm (Specify when ordering)
Process connection
CodeProcess connection
F1M20×1.5 Thread
F2M27×2 / G½ Thread
F31/2NPT Thread
F4DN25 / DN50 Flange
F5Adjustable compression fitting (Depth Adjustable)
Additional functions
CodeAdditional functions
X1No additional (basic)
X2High and low limits electrical contact (1 group)
X3Double cap/ double floor electrical contact (2 group)

Confirm specifications and ordering options

Contact us with the measurement target, operating conditions, and installation requirements to confirm your configuration.

Contact us
TEMPSEN-BM-100 Bimetallic Thermometer (Axial)