PathClick on the picture to zoom in.
PRODUCT SPECIFICATIONS
TEMPSEN-BM-150
Double metal thermometers .
Double metal thermometers, routing. Double metal indicator thermometers
01
Classification: Double metal thermometer
02
Structure form: Path
TECHNICAL SPECIFICATIONS
Technical specifications
Check the specifications against your operating conditions and use the selection tables to confirm your order configuration.
View selection tables ↓| Model | TEMPSEN-BM-150 |
|---|---|
| Temperature measurement principle | A rolled bimetal strip combines two metals with different coefficients of thermal expansion. It bends as temperature changes, moving the pointer for a direct reading. |
| Mounting type | Radial: Dial Vertical with Protection tube Axis (lower/ straight) Dial Positive to operator for vertical installation at top of pipe, top of container |
| Dial diameter | Φ60, Φ100, Φ150 (Φ63 / Φ80 / Φ160 Optional) |
| Measurement range | -80–+500℃ (typical -20–+100℃, 0–150℃, 0–200℃, 0–300℃, 0–400℃) |
| Scale division | Φ60 and Φ100: 2.0 °C per division. Φ150: 5.0 °C per division. Match to the selected range. |
| Accuracy class | Class 1.5 (standard) / class 1.0 (optional) |
| Case material | 304 stainless steel body stamped, sealed waterproof; optional 316L or stainless steel + spray (acid-resistant fog) |
| Window material | Industrial glass (standard) or shatter-resistant polycarbonate (optional) |
| Sensing element | Heat-stabilized bimetal spiral spring with low long-term indication drift |
| Protection tube material | 1Cr18Ni9Ti / 304 / 316L stainless steel optional PTFE covered (reserve) Hastelloy (strength corrosive) |
| Protection tube dimensions | φ8 / φ10 × L (insertion depth 75–1000mm Optional); Optional cone head easily inserted |
| Process connection | M20×1.5 / M27×2 / G½ / 1/2NPT thread optional DN25–DN50 Flange Welding cams |
| Insertion depth | 75 / 100 / 150 / 200 / 250 / 300 / 400mm (typical); insertion depth should reach the centre line 1/2–2/3 when vertical pipe is installed |
| Pressure rating | Constant pressure –6.4MPa (Protection tube by wall thickness and diameter, pressure type Specify when ordering) |
| Ambient temperature | -20–+60℃ (dial); optional -40–+80℃ Extended-temperature type |
| Ingress protection | IP65 (shell sealed); optional IP67 |
| Vibration-resistant option | Silicone oil (Damping fluid) anti-vibration in the shell, applicable to powerful vibration sites such as pumps, compressors, etc. |
| Electrical contact option | High and low limits alarm contact (1–2 group), contact rating 220VAC / 1A, with control of the circuit |
| Applicable standards | JB/T 8803 bimetallic thermometer / JJG 226 verification regulation / GB/T 1226 (common requirements) |
| Suitable operating conditions | In situ temperature Display of heating pipe network, boiler water supply and backwater, heat exchanger import/ export, storage tanks and water tanks, chemical pipeline Radial readings are in the direction of inspectors, the highest Typical type on site |
| Product features | Read intuitively, with perspective on the operational side; read directly without power; sealed surfaces can be installed outdoors; oil resistant, belt Electrical contact in situ Alarm |
Product selection
TEMPSEN-BM-150| Code | Dial diameter |
|---|---|
| D1 | Φ60 |
| D2 | Φ100 (Typical) |
| D3 | Φ150 |
| Code | Measurement range (℃) |
|---|---|
| R1 | -80~+40 / -50~+50 |
| R2 | -20~+100 / 0~+100 |
| R3 | 0~+150 / 0~+200 |
| R4 | 0~+300 / 0~+400 |
| R5 | 0–+500 (Specify when ordering) |
| Code | Accuracy class |
|---|---|
| E1 | 1.5 Class (Standard) |
| E2 | Level 1.0 |
| Code | Case / window |
|---|---|
| H1 | 304 stainless steel + industrial glass |
| H2 | 304 stainless steel + PC Shatter-resistant Window |
| H3 | 316L Stainless steel shells (resisting) |
| H4 | Fill Silicone oil Vibration-resistant type (resilient) |
| Code | Protection tube material / diameter |
|---|---|
| M1 | 1Cr18Ni9Ti φ8 |
| M2 | 304 stainless steel φ10 (Standard) |
| M3 | 316L stainless steel φ10 (resisting) |
| M4 | PTFE wrap (strength corrosive) |
| Code | Insertion depth L |
|---|---|
| L1 | 75 / 100mm |
| L2 | 150 / 200mm |
| L3 | 250 / 300mm |
| L4 | 400 / 500mm |
| L5 | 750 / 1000mm (Specify when ordering) |
| Code | Process connection |
|---|---|
| F1 | M20×1.5 Thread |
| F2 | M27×2 / G½ Thread |
| F3 | 1/2NPT Thread |
| F4 | DN25 / DN50 Flange |
| F5 | Welded cams / Welded seats |
| Code | Additional functions |
|---|---|
| X1 | No additional (basic) |
| X2 | High and low limits electrical contact (1 group) |
| X3 | Double cap/ double floor electrical contact (2 group) |
Confirm specifications and ordering options
Contact us with the measurement target, operating conditions, and installation requirements to confirm your configuration.
Contact us

