Zero.Click on the picture to zoom in.
PRODUCT SPECIFICATIONS
TEMPSEN-BM-200
Two-metal thermometers.
Double metal thermometers, all-way configuration.
01
Classification: Double metal thermometer
02
Construction: swivel type
TECHNICAL SPECIFICATIONS
Technical specifications
Check the specifications against your operating conditions and use the selection tables to confirm your order configuration.
View selection tables ↓| Model | TEMPSEN-BM-200 |
|---|---|
| Temperature measurement principle | A rolled bimetal strip combines two metals with different coefficients of thermal expansion. It bends as temperature changes, moving the pointer for a direct reading. |
| Mounting type | One-way: between the shell and protection tube, the ball head clinks (one-way section), dial can be reconciled and locked in any direction above ±90°, adapted to any angle |
| Dial diameter | Φ60, Φ100, Φ150 (Φ63 / Φ80 / Φ160 Optional) |
| Measurement range | -80–+500℃ (typical -20–+100℃, 0–150℃, 0–200℃, 0–300℃, 0–400℃) |
| Scale division | Φ60 and Φ100: 2.0 °C per division. Φ150: 5.0 °C per division. Match to the selected range. |
| Accuracy class | Class 1.5 (standard) / class 1.0 (optional) |
| Antenna aiming mechanism | Stainless steel ball head + lock the nut, adjust the angle range 0–90° (one axis) / 0–180° (two axes Optional) and lock it up undisturbed and non-vibrated |
| Case material | 304 stainless steel body stamped, sealed waterproof; optional 316L or stainless steel + spray (acid-resistant fog) |
| Window material | Industrial glass (standard) or shatter-resistant polycarbonate (optional) |
| Sensing element | Heat-stabilized bimetal spiral spring with low long-term indication drift |
| Protection tube material | 1Cr18Ni9Ti / 304 / 316L stainless steel optional PTFE covered (reserve) Hastelloy (strength corrosive) |
| Protection tube dimensions | φ8 / φ10 × L (insertion depth 75–1000mm Optional); Optional cone head easily inserted |
| Process connection | M20×1.5 / M27×2 / G½ / 1/2NPT thread; optional DN25–DN50 Flange, Adjustable compression fitting |
| Insertion depth | 75 / 100 / 150 / 200 / 250 / 300 / 400mm (typical); not less than temperature segment length and insert medium ≥50mm |
| Pressure rating | Constant pressure –6.4MPa (mixed by O circle + double structure of metal cones) |
| Ambient temperature | -20–+60℃ (dial); optional -40–+80℃ Extended-temperature type |
| Ingress protection | IP65 (shell sealed); optional IP67 |
| Vibration-resistant option | Silicone oil (Damping fluid) anti-vibration in the shell, applicable to powerful vibration sites such as pumps, compressors, etc. |
| Electrical contact option | High and low limits alarm contact (1–2 group), contact rating 220VAC / 1A, with control of the circuit |
| Applicable standards | JB/T 8803 bimetallic thermometer / JJG 226 verification regulation / GB/T 1226 (common requirements) |
| Suitable operating conditions | Dial for restricted locations: piping areas, wing walls, ship and mobile equipment, multiple-location inspection devices |
| Product features | The Dial is constantly moved to the best reading angle; double seal is guaranteed not to see through; direct reading is done without power and maintenance is extremely low |
Product selection
TEMPSEN-BM-200| Code | Dial diameter |
|---|---|
| D1 | Φ60 |
| D2 | Φ100 (Typical) |
| D3 | Φ150 |
| Code | Measurement range (℃) |
|---|---|
| R1 | -80~+40 / -50~+50 |
| R2 | -20~+100 / 0~+100 |
| R3 | 0~+150 / 0~+200 |
| R4 | 0~+300 / 0~+400 |
| R5 | 0–+500 (Specify when ordering) |
| Code | Accuracy class |
|---|---|
| E1 | 1.5 Class (Standard) |
| E2 | Level 1.0 |
| Code | Aiming adjustment type |
|---|---|
| W1 | Single ball head 0–90° (Standard) |
| W2 | Two-axis head 0–180° |
| W3 | Ballhead + carcasses (which can be quickly turned and locked) |
| Code | Case / window |
|---|---|
| H1 | 304 stainless steel + industrial glass |
| H2 | 304 stainless steel + PC Shatter-resistant Window |
| H3 | 316L Stainless steel shells (resisting) |
| H4 | Fill Silicone oil Vibration-resistant type (resilient) |
| Code | Protection tube material / diameter |
|---|---|
| M1 | 1Cr18Ni9Ti φ8 |
| M2 | 304 stainless steel φ10 (Standard) |
| M3 | 316L stainless steel φ10 (resisting) |
| M4 | PTFE wrap (strength corrosive) |
| Code | Insertion depth L |
|---|---|
| L1 | 75 / 100mm |
| L2 | 150 / 200mm |
| L3 | 250 / 300mm |
| L4 | 400 / 500mm |
| L5 | 750 / 1000mm (Specify when ordering) |
| Code | Process connection |
|---|---|
| F1 | M20×1.5 Thread |
| F2 | M27×2 / G½ Thread |
| F3 | 1/2NPT Thread |
| F4 | DN25 / DN50 Flange |
| F5 | Adjustable compression fitting (Depth Adjustable) |
Confirm specifications and ordering options
Contact us with the measurement target, operating conditions, and installation requirements to confirm your configuration.
Contact us

